How to replace the LED Driver?

-

 

How to replace the LED Driver?

From: www.hzleddriver.com
       It is a difficult procedure for replacing LED driver. Usually when an LED fixture broke is due to driver problems. So only replacing driver will save your cost instead of purchasing a new whole fixture。

      When you need to replace the LED driver
       It’s time for you do the retrofit when two conditions appears. Overdriving, when the driver transfers power exceeds the normal value which a LED can receive. You can easily judge by observing the higher brightness of the fixture than others. The other sign is underdriving, which means the driver can’t send enough power to the LEDs. Usually lower brightness will appear when such circumstance happens.

      What you need to know when replacing your driver

       Things you should be aware when do the driver replacement.
Before you do the replacement, there are several information you should note:
    1. Is it a normal lighting fixture or a special one which the driver work for? For example, in hospital or sports arenas? For indoor or outdoor fixture?
    2. The electrical parameters you should know before the replacement.Like power, input and output voltage range and current. Sometimes additional factors are required such as PF,Efficiency, etc.
    3.Dimmable or non-dimmable and the dimming way also important. As the LED technology develops faster and faster, dimmable drivers are used widely and commonly.
    4.Constant current or constant voltage. These are two different types of LED drivers. Usually for LED lighting fixtures are complied with most of constant current drivers, and for some decorating lighting like LED strips are go with constant voltage drivers.
    5.EMI complied.You should note the class B for residential and class A for non-residential application when considering the EMI factor of a LED driver.
It will be easier for your to choose a new driver when do the replacement if you well acquired above knowledge.
workbench-01 workbench-02

       Make it simple when purchase Hi-zealed driver.

        As you know, it is not convenient to order a replacement driver if supplier don’t have it in stock.Take it into account the endless shipping time for deliver a little device will impact your company’s daily operation.
Our company has a broaden range of product series and can provide the alternative solution for you. Our modernized equipment and fast respond team with professional skill can meet your diverse needs. Welcome to contact us for a inquiry.

评论

发表评论

此博客中的热门博文

Led Driver for tube light

-
图片
  Led Driver for tube light From:  www.hzleddriver.com          LED tube driver  is a LED driver power supply, it is the most important part of an LED tube lamp. improper choice, LED tube lamps can not play a performance, even can not be used normally.         Led Tube driver has two kinds built-in and external, the built-in is a long strip, that can be directly inserted into the semicircular tube inside. The built-in led driver is also divided into two types: isolated and non-isolated. Non-isolated means that there is a direct connection between the load end and the input end, and there is the risk of touch shock, especially when the load is high voltage.         The non-isolated type is most commonly used at present, which is directing step-down the power supply, as shown in Figure 1 ( HAD028CXN ). The non-isolated constant current led driver power supply has the advantages of simplicity and high index, an...
Read more »

How to judge the quality of Led Driver?

-
图片
  How to judge the quality of Led Driver? From:  www.hzleddriver.com   A few simple ways to identify the quality of an Led power supply: 1.  PFC (Power Factor Correction)         Now some countries will require at least PF>0.7, but not necessarily high PFC is good, but also consider the overall oblique wave (small), ripple (small), interference (low), because some manufacturers deliberately make the PFC very high but ignore the electromagnetic compatibility part. 2.  Conversion efficiency         Conversion efficiency, the value, and the stability of the deviation. For example, in the working voltage range of AC170-250V, you can try to debug it from 170V-250V. The voltage changes from low to high constantly, so that you can see on the power meter whether the fluctuation of "conversion efficiency, PFC" is large to prove its stability. 3.  Whether the temperature rise of the power supply is high       ...
Read more »

Choose a Led Driver for Street Light

-
图片
  Choose a Led Driver for Street Light From:  www.hzleddriver.com         With the development of the led lighting industry, the development of commercial led street lights is also getting faster and faster, and the advantages brought by led as an outdoor lighting source are becoming more and more prominent. Good power saving rate and lighting comfort make the development of led outdoor lighting more and the better. How to choose the right  led street light power supply , you need to consider a variety of factors. Here are the factors to consider when picking the best-led driver for the led street: 1. High-quality components         Street lights are in severe weather such as high temperature, high humidity, and lighting strikes, so the quality requirements for led drivers are very high. The quality of the led driver will affect the life of the led street lamp, and the quality of the led driver will be affected not only by good desi...
Read more »