How to install an Led Driver?

-

 

How to install an Led Driver?

From: www.hzleddriver.com
        With the development of LED lighting, people gradually understand one of the key components of the LED lighting systems --- Led Driver. When we have an led driver, we will be troubled about how to install this led driver. The following content can help you know to install the led driver.

install-led-driver


Led driver installation steps：
1. First, carefully read the relevant parameters of the led driver, such as voltage, current, etc., to ensure that the parameters of the led driver match the LED.
2. Consider the IP level of the Led driver to determine the external environment where the led driver is located. If the led driver is installed outdoors, it needs to have a certain waterproof performance. There are led drivers specially designed for outdoor environments, such as the model HPD036CXI IP65 waterproof led driver, which is designed for outdoor lighting.
3. Identify the P (positive) and N (neutral) wires of the power and disconnect the grid.
4. Install the led driver - fix the led driver with suitable screws. The positive pole of the Led driver output terminal is connected to the positive pole of the input terminal of the led light. The negative pole of the output terminal of the Led driver is connected to the negative pole of the input terminal of the led light.
5. The positive pole of the input terminal of the led driver is connected to the P pole of the power, and the negative pole of the input terminal is connected to the N pole of the power.
6. After the led driver is installed, confirm again that all the wires are connected correctly and firmly, and the heat dissipation is in good condition. In the event of a failure, disconnect the power first and look carefully to see if there is a problem with the connection. If the led driver is defective, the led driver needs to be replaced.

led-driver-illustration


        When installing the Led driver, we need to pay attention to the ambient humidity and temperature. In order to ensure the stable operation of the led driver, the led driver needs a relatively dry and ventilated location to keep it working in the best environment. If you have any questions about how to install the led driver, please contact us and our experienced engineers will answer them for you.

评论

发表评论

此博客中的热门博文

Led Driver for tube light

-
图片
  Led Driver for tube light From:  www.hzleddriver.com          LED tube driver  is a LED driver power supply, it is the most important part of an LED tube lamp. improper choice, LED tube lamps can not play a performance, even can not be used normally.         Led Tube driver has two kinds built-in and external, the built-in is a long strip, that can be directly inserted into the semicircular tube inside. The built-in led driver is also divided into two types: isolated and non-isolated. Non-isolated means that there is a direct connection between the load end and the input end, and there is the risk of touch shock, especially when the load is high voltage.         The non-isolated type is most commonly used at present, which is directing step-down the power supply, as shown in Figure 1 ( HAD028CXN ). The non-isolated constant current led driver power supply has the advantages of simplicity and high index, and its output current can be determined according to the number of LED series an
Read more »

How to judge the quality of Led Driver?

-
图片
  How to judge the quality of Led Driver? From:  www.hzleddriver.com   A few simple ways to identify the quality of an Led power supply: 1.  PFC (Power Factor Correction)         Now some countries will require at least PF>0.7, but not necessarily high PFC is good, but also consider the overall oblique wave (small), ripple (small), interference (low), because some manufacturers deliberately make the PFC very high but ignore the electromagnetic compatibility part. 2.  Conversion efficiency         Conversion efficiency, the value, and the stability of the deviation. For example, in the working voltage range of AC170-250V, you can try to debug it from 170V-250V. The voltage changes from low to high constantly, so that you can see on the power meter whether the fluctuation of "conversion efficiency, PFC" is large to prove its stability. 3.  Whether the temperature rise of the power supply is high         The higher the temperature of the power supply itself, the greater the d
Read more »

Choose a Led Driver for Street Light

-
图片
  Choose a Led Driver for Street Light From:  www.hzleddriver.com         With the development of the led lighting industry, the development of commercial led street lights is also getting faster and faster, and the advantages brought by led as an outdoor lighting source are becoming more and more prominent. Good power saving rate and lighting comfort make the development of led outdoor lighting more and the better. How to choose the right  led street light power supply , you need to consider a variety of factors. Here are the factors to consider when picking the best-led driver for the led street: 1. High-quality components         Street lights are in severe weather such as high temperature, high humidity, and lighting strikes, so the quality requirements for led drivers are very high. The quality of the led driver will affect the life of the led street lamp, and the quality of the led driver will be affected not only by good design but also by the reliability of the led driver power
Read more »